Changes in Mobius FW V2.18

NOTE:  You must download  v3.0.3.0 of the mSetup.exe GUI program to use with this firmware!
 
BUG FIXES:

1.  Fixed unexpected recording termination in Time Lapse Photo mode and with certain video clip lengths
2.  Fixed non-functional Contrast control function when Vivid Color Option is ON
3.  Fixed non-functional Mono Color Effect setting.
4.  Tweaked the WDR settings a bit.
5.  Fixed inoperative "Power Off with external power disconnect" function in Time Lapse Photo Mode when  "Auto Record withexternal power connection" function is set.
6.  Fixed PAL (25 and 50fps) recording to record unique frames, but there is still an obscure problem during playback that causes the video to notplay back smoothly.  Some players (e.g. VLC) show jerky motion whereas WMP is much better, though still noticeable.
7.  Fixed off-center 1080p Narrow video frame.
8.  Fixed large jump in first Exposure Function increase increment above mid point
9.  Fixed File protection bug that only protected the last file in a continuous sequence.  Now uses this logic:
	a. If the current running file is less than 1 minute, it should lock previous file and the current file.
	b. If the current running file will be closed less than 1 minute, it should lock the current file and the next file.
	c. If the current running file has recorded over 1 minute and will be closed after 1 minute, only the current file is locked.

NOTE:  You must turn on your folder options to show "Detail" file view with file "Attributes" toggled on in the folder header.  Protected files will show an "R" flag to indicated the file is "read only".
10. Fixed inconsistent timing when when Time Lapse Photo delay was set greater than 1 day.
11.  Added a Card Format option to select FAT32 or exFAT for cards greater than 32 GB capacity.  Currently formatting 128GB cards with FAT32 does not work in the Mobius does not work.
12.  Eliminated the "weak" intermittent and moving scan line near the top of video frames. 
13. Fixed failure of a new clip to be started at the 4GB file size limit if the camera was powered by a standard 4 wire USB data cable plugged in a computer USB port.

KNOWN ISSUES REMAINING:
1.  Jerky play back in PAL video modes (25 and 50 fps)
2.  No way to tell the camera is in "sleep" mode between frame captures with very long time lapse photo modes 
3.  Timelapse Photo Mode delay must be set to 2 sec. or greater when Video out is turned on (Note:  plugging in Mobius video out cable with it's pin 4 grounded to pin 5 turns on video out starting with V2 cameras.).  Any lower setting will be changed to 2 sec. by the FW, and will not be reset when video out is turned off.  If video out is not needed, do not use the stock video out cable to provide external power to the camera... use any generic 2 wire USB power cable.
4.  In-camera formatting of 128GB cards with FAT32 does not work, but can be done with some external formatting programs.


 



 


